2MP/1080P AHD/HD-CVI/HD-TVI/960H CCTV Camera Tester 4-in-1 with 3.5" LCD Screen

• CCTV system installation and maintenance 
• Network cabling project installation and maintenance 
• Dome camera and all-in-one camera testing 
• Video transmission channel testing 
• PTZ control

• 3.5 inch screen display, 480 (RGB) x 320 resolution
• Low power consumption, working time lasts 11 hours
• LCD screen brightness/ contrast/ color saturation adjustable, NTSC/PAL auto adjust
• AHD, HD-CVI, HD-TVI coaxial camera image display, coaxial PTZ control and call up the OSD menu
• Enhanced Color Bar Generator, PAL/NTSC multi-system color bar video generator (Eight system switchable, transmit/receive eight system colorful images)
• LED flashlight
• HD coaxial control, PTZ control, color bar generator shortcut key
• F1, F2 user-defined key
• PTZ control and PTZ control analysis
• Cable test, Test LAN cable or telephone cable, UTP cable, etc.; cable type and the sequence of wires will be displayed
• Support more than 30 protocols, such as Pelco-D, Pelco-P, and Samsung
• Support RS485, rate 600 ~ 115200 bps adjustable
• Includes Lithium Ion Polymer Battery (3.7V DC 3000mAh)
• Image display and data control integration Handheld, easy to carry and operate

• Video signal test: view the image easily and directly from the camera.  
• HD coaxial signal test: HD-TVI, HD-CVI and AHD coaxial signal test, support up to 1080p.  The tester will display camera image and call up the camera OSD menu.
• Video signal level test (for analog): Test video signal strength attenuation, longer video signal cable will cause the image to be dim and reduce the image dynamic range; when video signal is too strong, it will cause virtual shadow and reduce the sharpness of the image.  It can also display the video level value; if out of range, notices will be displayed on the screen.
• PTZ controller: display the input video images.  Setup the controlling parameters like protocol, communication port, baud rate, PTZ ID, pan/tilt speed, set and call preset position.
• Enhanced color bar generator: the tester sends out color bars via its BNC output to the monitor.  This is used when there are problems in the cable going from the camera back to the monitoring area.
• DC12V 1A output power: power DC12V camera from the tester when power supply is not available.
• Audio testing: test the audio input from pickup devices.  Connect the tester and audio pickup device with the included audio cable.
• PTZ controller: search the control protocol code from the Multifunction keyboard or DVR by RS485 interface, test the PTZ control command data when receiving anomaly of RS485 data transmission.  Screen displays 16 hexadecima codes such as: PELCO-P: A0 00 (Add) xx xxxxxx AF xx; PELCO-D: FF 01 (Add) xx xxxxxxxx
• PTZ Address scanning: search ID of PTZ camera.  Helps search the speed dome address quickly.
• LED lamp: Press the LED On/Off button to use the LED flashlight.
• HD coaxial, PTZ control and color bar generator shortcut key for easier use

• HD CCTV Tester x1
• Power adapter x1
• USB cable x1
• Power cable x1
• Audio cable x1
• RS485 cable x1
• BNC cable x1
• Safety cord x1
• Cable tester x1
• Lithium ion polymer battery x1
• Tool bag x1
• Tool bag strap x1
• Manual x1

**NOTE**: This tester is only for For HD cctv cameras like AHD/HD-TVI/HD-CVI, HD Turbo cameras only.

If you need  IP camera and HD/HD-TVI/HD-CVI cameras tester, please see the following item: